PLH54-1 Oil-Resistant Anti-Static Anti-Corrosion Coating

Overview
Two-component oil-resistant anti-static anti-corrosion coating for conductive static dissipation in tank internal linings.​

Composition
Epoxy resin and modified resin binder, compounded with conductive fillers, anti-static agent, and additives; supplied as Part A & Part B.​

Typical uses
Anti-static and anti-corrosion protection for internal linings of storage tanks holding crude oil, gasoline, aviation gasoline, kerosene, and naphtha.​
Also suitable for other applications requiring static dissipation.​

Technical data (typical)

• Appearance: light grey.​

• Theoretical consumption: 0.19 kg/m² at 80 µm DFT (loss not included).​

• Density: 1.4 kg/L.​

• Drying time (25°C): surface dry 2 h; hard dry 24 h; full cure 7 d.​

Application data (25°C)

• Mixing ratio (A:B): 20:2.​

• Induction time: 5 min.​

• Pot life: 3 h.​

• Application methods: airless spray, brush, roller.​

• Thinner: X-7 epoxy thinner, 3–9% (more for air spray/roller).​

• Recoat interval: min 24 h; max 7 d.​

• Recommended DFT per coat: 60–90 µm (brush/roller 30–50 µm).​

• System: PLH54-1 anti-static primer + topcoat.​

Surface preparation
After tank compartment/steel tank assembly, abrasive blast clean to Sa 2.5; surface profile 30–75 µm.​
If an inorganic zinc silicate shop primer is used for temporary protection, verify curing; if under-cured, re-blast to remove it and clean contaminants before coating.​

System compatibility / packing / storage

• System compatibility: PLH54-1 oil-resistant anti-static anti-corrosion primer + topcoat.​

• Packing: Part A 20 kg; Part B 2 kg.​

• Storage: dry, cool, ventilated; away from fire; avoid strong sunlight; no outdoor storage.​

• Shelf life: 12 months.