PLB52-3 Modified acrylic topcoat

Overview
Single-pack modified acrylic topcoat with good physical/mechanical properties and improved corrosion and weather resistance.​
Suitable for low-temperature application.​

Composition
Formulated with modified acrylic resin, solid acrylic resin, quality pigments, solvents, and additives.​

Typical uses
Protective finishing for steel structures, concrete, and buildings in power, metallurgy, machinery, and transportation industries.​

Technical data (typical)

• Appearance: Various colors.​

• Theoretical consumption: 0.16 kg/m² at 40 μm DFT (excluding loss).​

• Density: 1.2 kg/L.​

• Drying time (25°C): Surface dry 0.5 h; hard dry 3 h.​

Application data (25°C)

• Mixing: Single-pack.​

• Induction time: None.​

• Pot life: Unlimited.​

• Application methods: Airless spray, brush, roller.​

• Thinner: X-14 acrylic thinner; dilution 3–7%.​

• Recoat interval (25°C): Min 12 h; max unlimited.​

• Recommended coats / DFT: 1 coat 40–60 μm; brush/roller 1 coat 30–40 μm.​

Surface preparation
Remove dust and oil contamination from the previous coat; if beyond maximum recoat interval, consider roughening as needed.​
When used as the first coat: blast/shot blast to Sa 2.5 or power-tool cleaning to St 3; surface profile 30–75 μm.​

System compatibility / packing / storage

• Compatibility: Previous coat—epoxy primer; epoxy micaceous iron oxide intermediate coating; chlorinated rubber anti-rust coating; acrylic anti-rust coating.​

• Packing: 22 kg.​

• Storage: Shelf life 12 months; store dry/cool/ventilated, away from fire and direct sunlight; no outdoor stacking.