- +86 150 5000 6973
- +1 225 255 1197 (US
- info@huilicoating.com
- Yongqiao District, Anhui, China
ISO 9001:2015 Certified
2K epoxy furan glass flake coating with outstanding chemical barrier and abrasion resistance for steel and concrete in immersion and heavy chemical environments. Suited as standalone coating or intermediate coat. 150µm DFT per coat.
Overview
Two-component epoxy furan glass flake coating for long-term heavy-duty corrosion protection in wet service and heavy chemical environments.
Composition
Epoxy furan resin, glass flake, pigments, additives, solvent; modified amine hardener; supplied as Component A & Component B.
Typical uses
Long-term heavy-duty protection for steel structures and concrete facilities in underwater or humid environments and heavy chemical areas.
Can also be used as an intermediate coating.
Technical data (typical)
Appearance: various colors.
Theoretical consumption: 0.43 kg/m² at 150 µm DFT (loss not included).
Density: 1.25 kg/L.
Drying time (25°C): surface dry 2 h; hard dry 24 h; full cure 7 d.
Salt water resistance: 1 year, film unchanged.
Application data (25°C)
Mixing ratio (A:B): 20:4.
Induction time: 5 min.
Pot life: 4 h.
Application methods: airless spray, brush, roller.
Thinner: dedicated thinner, 3–8%.
Recoat interval: min 12 h; max 7 d.
Recommended DFT per coat: 60–80 µm (brush/roller 40–50 µm).
Surface preparation
Steel: blast to Sa 2.5 or power-tool clean to St 3; surface profile 30–75 µm.
System compatibility / packing / storage
Packing: Part A 20 kg; Part B 4 kg.
Storage: dry, cool, ventilated; away from fire; avoid strong sunlight; no outdoor storage.
Shelf life: 12 months.
We would love to speak with you.
Feel free to reach out using the below details.
Cementitious non-intumescent fire-resistant coating with 3-hour fire rating for indoor steel structures including stations, warehouses and stadiums. Non-corrosive to steel, smoke-free and non-toxic. Sa2.5 prep, 16–32mm total application thickness.
2K ethyl silicate inorganic zinc-rich primer with high zinc content for maximum cathodic protection on industrial steel. Engineered for bridges, transmission towers & oil pipelines. Weld and cut tolerant, Sa2.5 prep, 40–80µm DFT.
2K epoxy iron oxide primer with impact-resistant film and strong adhesion on steel and concrete. Compatible with polyurethane, alkyd & chlorinated rubber topcoat systems. Ambient cure at 25°C, 35–40µm DFT.
Industrial anti-corrosion and protective coating manufacturer. Direct supply from factory — no agents. ISO 9001 certified. Exporting to 30+ countries.
