PL844 Chlorinated Rubber Acrylic Hull Coating

Overview
Chlorinated rubber acrylic hull coating for ship hull areas above the waterline where weatherability and seawater resistance are required.​
Performance focus: toughness, impact resistance, decorative finish, and low-temperature application capability.​

Composition
Chlorinated rubber resin with acrylic resin, special weather-resistant pigments, toughening agent, solvent, and additives.​

Typical uses
Surface protection and decoration for ship hull exterior areas above the waterline.​

Technical data (typical)

• Appearance: various colors.​

• Theoretical consumption: 0.16 kg/m² at 40 µm DFT (loss not included).​

• Density: 1.2 kg/L.​

• Drying time (25℃): surface dry 1 h; hard dry 24 h; full cure 7 d.​

Application data (25°C)

• Mixing ratio: single-pack.​

• Induction time: none.​

• Pot life: unlimited.​

• Application methods: airless spray, brush, roller.​

• Thinner: 101 thinner, 3–8%.​

• Recoat interval: min 8 h; max unlimited.​

• Recommended coats/DFT: 1 coat 30–50 µm; brush/roller 1 coat 30–40 µm.​

• Recommended undercoats: epoxy primer; chlorinated rubber antirust coating; chlorinated rubber intermediate coating.​

Surface preparation
Over existing coating: remove dust, oil, and debris; roughen as needed if maximum recoat interval is exceeded.​
As first coat: blast-clean steel to Sa 2.5 or power-tool clean to St 3; surface profile 30–75 µm.​

System compatibility / packing / storage

• Compatibility: compatible over epoxy primer and chlorinated rubber systems; suitable for low-temperature application; apply at RH ≤85%, avoid rain/snow/strong wind (>6.7 m/s)/heavy fog/intense sunlight.​

• Packing: 20 kg.​

• Storage: store in a dry, cool, ventilated warehouse; keep away from fire sources; avoid strong sunlight; no outdoor stacking; shelf life 12 months.