- +86 150 5000 6973
- +1 225 255 1197 (US
- info@huilicoating.com
- Yongqiao District, Anhui, China
ISO 9001:2015 Certified
Single-component chlorinated rubber acrylic topcoat retaining full chlorinated rubber corrosion resistance with improved gloss and weathering performance. Engineered for industrial facilities and steel structures in aggressive environments. Sa2.5 prep required.
Overview
Chlorinated rubber acrylic anti-corrosion topcoat for surface protection and finishing in harsh environments.
Provides anti-corrosion performance, a smooth/level film appearance, and improved weathering and gloss retention.
Composition
Formulated with chlorinated rubber modified acrylic resin, special pigments, solvents, and additives.
Typical uses
For surface anti-corrosion protection and finishing of equipment and industrial buildings/workshops in various harsh environments.
Technical data (typical)
Appearance: Various colors.
Density: 1.2 kg/L.
Theoretical consumption: 0.14 kg/m² at 35 μm DFT (excluding loss).
Drying time (25°C): Surface dry 1 h; hard dry 12 h.
Application data (25°C)
Mixing: Single-pack.
Induction time: None.
Pot life: Unlimited.
Application methods: Airless spray, brush, roller.
Thinner: Dedicated thinner; dilution 3–7%.
Recoat interval (25°C): Min 12 h; max unlimited.
Recommended coats / DFT: 1 coat 40–60 μm; brush/roller 1 coat 30–40 μm.
Surface preparation
Remove dust, oil, and debris from the previous coat; if beyond maximum recoat interval, consider roughening as needed.
When used as the first coat: blast/shot blast to Sa 2.5 or power-tool cleaning to St 3; surface profile 30–75 μm.
System compatibility / packing / storage
Compatibility: Previous coat—epoxy primer; epoxy intermediate coating; chlorinated rubber acrylic anti-rust primer; chlorinated rubber anti-rust primer.
Packing: 22 kg.
Storage: Shelf life 12 months; store in a dry, cool, ventilated place away from fire and direct sunlight; do not store outdoors.
We would love to speak with you.
Feel free to reach out using the below details.
2K special epoxy primer with outstanding adhesion and impact resistance for demanding industrial applications. Engineered for power plants, bridges & petrochemical facilities. Compatible with all topcoat systems, 60µm DFT per coat.
2K epoxy sealer primer engineered for deep penetration and encapsulation of concrete and cement substrates. Seals and stabilizes surfaces to optimize adhesion for subsequent coating systems. Surface dry in 1 hour, full cure in 7 days.
2K modified epoxy iron oxide primer with enhanced water resistance and corrosion protection for steel and concrete. Compatible with polyurethane, acrylic & chlorinated rubber topcoats. Abrasion-resistant film, high adhesion, 35–40µm DFT.
