- +86 150 5000 6973
- +1 225 255 1197 (US
- info@huilicoating.com
- Yongqiao District, Anhui, China
ISO 9001:2015 Certified
Single-component general-purpose alkyd enamel with good gloss and mechanical film properties for metal and wood decorative and protective applications. Ambient cure, compatible with alkyd primer systems. 50–60µm DFT per 2-coat system.
Overview
Single-pack alkyd enamel coating for metal and wood substrates where gloss and basic mechanical properties are required.
Film focuses on gloss retention with good adhesion and ambient-temperature drying for general protective and decorative applications.
Composition
Alkyd resin with pigments, solvent, and driers.
Typical uses
Protective and decorative coating for metal and wood product surfaces.
Technical data (typical)
Appearance: various colors.
Theoretical consumption: 0.11 kg/m² at 30 µm DFT (loss not included).
Density: 1.2 kg/L.
Drying time (25℃): surface dry 8 h; hard dry 24 h; full cure 7 d.
Application data (25°C)
Mixing ratio: single-pack.
Induction time: none.
Pot life: unlimited.
Application methods: airless spray, brush, roller.
Thinner: X-6 alkyd thinner, 3–8%.
Recoat interval: min 24 h; max 7 d.
Recommended coats/DFT: 1 coat 20–30 µm (spray or brush).
Surface preparation
Over primer: all surfaces clean, dry, contaminant-free; roughen if maximum recoat interval exceeded.
As first primer: blast-clean steel to Sa 2.5 or power-tool clean to St 3; surface profile 30–75 µm.
System compatibility / packing / storage
System compatibility: used over alkyd primer and under alkyd enamel coating.
Construction conditions: RH ≤85%; 5–35℃; avoid rain/snow, strong wind (>6.7 m/s), heavy fog, intense sunlight.
Storage: dry, cool, ventilated warehouse away from fire sources; avoid strong sunlight; no outdoor stacking; shelf life 12 months.
Packing: 20 kg.
We would love to speak with you.
Feel free to reach out using the below details.
Single-component water-based intumescent coating delivering a 2-hour fire rating for indoor steel structures and building frames. Non-toxic, low-VOC formulation with strong adhesion. Sa2.5 prep required, 1.7–3.3mm application thickness.
2K alkyl silicate inorganic zinc primer delivering cathodic protection with weld and cut tolerance on structural steel. Suited for low-temperature application with universal topcoat compatibility. Sa2.5 prep required, 30µm DFT.
Single-component epoxy ester primer engineered for anti-corrosive protection on ferrous metals. Suited for coastal and high-humidity industrial environments. Air-dry or low-temperature bake cure, 25–30µm DFT per coat.
Industrial anti-corrosion and protective coating manufacturer. Direct supply from factory — no agents. ISO 9001 certified. Exporting to 30+ countries.
