Alkyd enamel coating for metal and wood surface finishing.
Metal and wood product surfaces.
0.11 kg/m² at 30 µm; recoat 24 h.
Single-pack over alkyd primer.
Overview
Single-pack alkyd enamel coating for metal and wood substrates where gloss and basic mechanical properties are required.
Film focuses on gloss retention with good adhesion and ambient-temperature drying for general protective and decorative applications.
Composition
Alkyd resin with pigments, solvent, and driers.
Typical uses
Protective and decorative coating for metal and wood product surfaces.
Technical data (typical)
Appearance: various colors.
Theoretical consumption: 0.11 kg/m² at 30 µm DFT (loss not included).
Density: 1.2 kg/L.
Drying time (25℃): surface dry 8 h; hard dry 24 h; full cure 7 d.
Application data (25°C)
Mixing ratio: single-pack.
Induction time: none.
Pot life: unlimited.
Application methods: airless spray, brush, roller.
Thinner: X-6 alkyd thinner, 3–8%.
Recoat interval: min 24 h; max 7 d.
Recommended coats/DFT: 1 coat 20–30 µm (spray or brush).
Surface preparation
Over primer: all surfaces clean, dry, contaminant-free; roughen if maximum recoat interval exceeded.
As first primer: blast-clean steel to Sa 2.5 or power-tool clean to St 3; surface profile 30–75 µm.
System compatibility / packing / storage
System compatibility: used over alkyd primer and under alkyd enamel coating.
Construction conditions: RH ≤85%; 5–35℃; avoid rain/snow, strong wind (>6.7 m/s), heavy fog, intense sunlight.
Storage: dry, cool, ventilated warehouse away from fire sources; avoid strong sunlight; no outdoor stacking; shelf life 12 months.
Packing: 20 kg.
We would love to speak with you.
Feel free to reach out using the below details.
Epoxy Glass Flake Topcoat (2K) – Epoxy glass flake topcoat for wet or chemical zones.
For underwater/humid areas and heavy chemical plants.
Mix ratio 20:2; pot life 4 h.
Salt water resistance: 1 year, no change.
Indoor Non-Intumescent Fireproof Coating for Steel Structure – Indoor cementitious thermal-insulation fireproof coating for steel.
3 h rating: ≥33 mm; 20–22 kg/m²; 5–6 coats.
Air spray 0.6–0.8 MPa; nozzle Φ4.0–6.0 mm.
Fire test: 32 mm thickness; 5400 mm span; 3.00 h.
Vinyl Phosphating Primer (2K) – Two-component phosphating primer for galvanized steel, aluminum, and other light metals.
Forms chemical adhesion to improve intercoat adhesion of subsequent coatings.
Low film thickness system: 15–25 µm DFT per coat; theoretical consumption 0.06 kg/m² at 20 µm DFT.
Min. recoat 2 h (25°C); dedicated PLX06 thinner (10–20%).
Epoxy Zinc-Rich Primer (2K) – Two-component epoxy zinc-rich primer for steel anti-corrosion systems.
For shipbuilding/repair, bridges, towers, gas holders, oil tanks, and steel structures.
Water and oil resistance with excellent adhesion.
Theoretical consumption 0.21 kg/m² at approx. 50 µm DFT (losses not included).
Protect. Perform. Endure. – Advanced Coatings for Industrial Excellence.
© 2025 All Rights reserved Anhui HUILI Coating Technology Co., Ltd. | Privacy Policy
Chinese