- +86 150 5000 6973
- +1 225 255 1197 (US
- info@huilicoating.com
- Yongqiao District, Anhui, China
ISO 9001:2015 Certified
2K water-based epoxy anti-static coating with excellent oil, water and corrosion resistance for crude oil, gasoline and diesel storage tank interiors. Low-VOC, non-flammable formulation. Sa2.5 prep, 40µm DFT per coat.
Overview
Two-component waterborne epoxy antistatic coating for steel tank internals where antistatic and anti-corrosion performance are both required.
Formulated for crude oil and refined fuel tanks, providing durable adhesion, chemical resistance, and conductive pathways for static dissipation.
Composition
Waterborne epoxy resin and curing agent with pigments, additives, and composite conductive materials; supplied as Part A & Part B; water as thinner.
Typical uses
Internal antistatic and anti-corrosion protection for compartments and storage tanks carrying crude oil, gasoline, kerosene, diesel, and similar media.
Technical data (typical)
Appearance: light grey.
Theoretical consumption: 0.11 kg/m² at 40 µm DFT (loss not included).
Drying time (25℃): surface dry 2 h; hard dry 24 h; full cure 7 d.
Application data (25°C)
Application methods: spray, brush, roller.
Pot life: 2 h at 25℃.
Thinner: clean water, 5–15%.
Recoat interval: min 24 h; max 7 d.
Surface preparation
Steel structures: blast-clean or power-tool clean to Sa 2.5 or St 3 with 30–75 µm surface profile.
System compatibility / packing / storage
System compatibility: used as internal lining over compatible primers or directly on properly prepared steel according to tank-lining specification.
Construction conditions: ambient 10–35℃ and at least 3℃ above dew point; not suitable in rain, fog, snow, or when RH ≥85%.
Storage: dry, cool, ventilated warehouse; 5–35℃; avoid exposure, severe cold, and rain.
Shelf life: 6 months.
We would love to speak with you.
Feel free to reach out using the below details.
2K epoxy sealer primer engineered for deep penetration and encapsulation of concrete and cement substrates. Seals and stabilizes surfaces to optimize adhesion for subsequent coating systems. Surface dry in 1 hour, full cure in 7 days.
Single-component epoxy ester primer engineered for anti-corrosive protection on ferrous metals. Suited for coastal and high-humidity industrial environments. Air-dry or low-temperature bake cure, 25–30µm DFT per coat.
2K C6-modified epoxy zinc primer engineered for synergistic cathodic protection and barrier performance. Suited for offshore platforms, marine vessels & petrochemical pipelines. Exceeds 1,200-hour salt spray resistance at 50µm DFT.
Industrial anti-corrosion and protective coating manufacturer. Direct supply from factory — no agents. ISO 9001 certified. Exporting to 30+ countries.
