- +86 150 5000 6973
- +1 225 255 1197 (US
- info@huilicoating.com
- Yongqiao District, Anhui, China
ISO 9001:2015 Certified
Single-component water-based acrylic amino baking enamel with high hardness, scratch and impact resistance for bicycles, home appliances and precision instrument metal components. Outstanding color and gloss retention. Bake cure at 130°C for 30 minutes, 25µm DFT.
Overview
Single-pack waterborne acrylic amino baking coating for decorative and protective finishes on metal components.
Composition
Acrylic resin dispersion and curing agent with pigments and special additives; water as thinner.
Typical uses
Protective and decorative coating for parts of bicycles, electric bicycles, household appliances, and other metal components of instruments and equipment.
Technical data (typical)
Appearance: various colors.
Theoretical consumption: 0.1 kg/m² at 25 µm DFT (loss not included).
Drying schedule: 130℃ for 30 min.
Application data (25°C)
Application methods: spray, brush.
Flash-off before baking: 10–15 min in clean environment.
Thinner: clean water, 10–50%.
Surface preparation
Workpiece surface clean and free from dust and oil; pre-treatment as required.
System compatibility / packing / storage
Construction conditions: ambient 5–35℃; do not apply when RH >85%.
Storage: cool, ventilated; 5–35℃; avoid sunlight, severe cold, and rain; 6-month shelf life.
We would love to speak with you.
Feel free to reach out using the below details.
Cementitious non-intumescent fire-resistant coating with 3-hour fire rating for indoor steel structures including stations, warehouses and stadiums. Non-corrosive to steel, smoke-free and non-toxic. Sa2.5 prep, 16–32mm total application thickness.
2K epoxy sealer primer engineered for deep penetration and encapsulation of concrete and cement substrates. Seals and stabilizes surfaces to optimize adhesion for subsequent coating systems. Surface dry in 1 hour, full cure in 7 days.
2K epoxy zinc-rich primer engineered for cathodic protection on structural steel. Suited for shipbuilding, bridges & oil tanks in aggressive environments. Sa2.5 prep required, 35–40µm DFT.
