- +86 150 5000 6973
- +1 225 255 1197 (US
- info@huilicoating.com
- Yongqiao District, Anhui, China
ISO 9001:2015 Certified
2K anti-corrosive coating system with strong adhesion to concrete and steel, applicable on damp substrates. Suited for cooling towers, wastewater pools and chemical plant floors. 30–40µm DFT per coat, 150µm+ total system.
Overview
Two-component anti-corrosion waterproof coating for concrete and steel substrates, designed for application on damp surfaces.
Composition
Polymer synthetic dispersion, pigments, additives, curing agent; supplied as Part A & Part B.
Typical uses
Waterproofing and anti-corrosion for sewage tanks, cooling towers, and walls/floors in chemical plant workshops.
Technical data (typical)
Appearance: primer grey; topcoat various colors.
Theoretical consumption: 0.16 kg/m² at 40 µm DFT (loss not included).
Drying time (25°C): surface dry 2 h; hard dry 24 h; full hardening 7 d.
Volume solids: ≥65%.
Acid resistance: 3% HCl, 72 h; no blistering, no peeling.
Application data (25°C)
Mixing ratio (A:B): 24:3.
Induction time: 5 min.
Pot life: 3 h.
Application methods: airless spray, brush.
Thinner: X-7 thinner, 3–10%.
Recoat interval: min 8 h; max 7 d.
Recommended DFT per coat: 30–40 µm.
System: AL-901-X primer + topcoat.
Surface preparation
Steel: blast to Sa 2.5 or power-tool clean to St 3; surface profile 30–75 µm.
System compatibility / packing / storage
System compatibility: AL-901-X cooling tower anti-corrosion waterproof primer + topcoat.
Packing: Part A 24 kg; Part B 3 kg.
Storage: dry, cool, ventilated; away from fire; avoid strong sunlight; no outdoor storage.
Shelf life: 12 months.
We would love to speak with you.
Feel free to reach out using the below details.
2K high-build epoxy topcoat with high-solids formulation for heavy-duty corrosion protection on steel and concrete. Outstanding chemical, solvent and water resistance. 60µm DFT per coat, 2-coat system to 120µm.
2K epoxy glass flake coating with exceptional chemical resistance and abrasion resistance for severe corrosive environments. Engineered for offshore structures, chemical plants & wastewater facilities. Achieves up to 300µm DFT in heavy-duty applications.
2K epoxy zinc phosphate primer with outstanding saltwater resistance and adhesion for heavy industrial applications. Engineered for port facilities, mining equipment & hydraulic steel in aggressive environments. Sa2.5 prep required, iron red or gray finish.
