- +86 150 5000 6973
- +1 225 255 1197 (US
- info@huilicoating.com
- Yongqiao District, Anhui, China
ISO 9001:2015 Certified
Single-component chlorinated rubber acrylic marking coating with excellent weathering, seawater and chemical atmosphere resistance for chimneys and steel towers. Fast-drying with low-temperature cure capability. 30µm DFT per coat, 120µm+ system.
Overview
Single-component chlorinated rubber acrylic marking coating for marking and protective service.
Provides weather resistance, water resistance, chemical-atmosphere resistance, and marine-climate resistance; fast drying and suitable for low-temperature application.
Composition
Formulated with chlorinated rubber resin, acrylic resin, pigments, plasticizer, solvents, and additives.
Typical uses
For marking and protection on concrete-structure chimneys in power plants, and for marking/protection on steel towers.
Technical data (typical)
Appearance: White; bright red, etc.
Theoretical consumption: 0.12 kg/m² at 30 μm DFT (excluding loss).
Density: 1.2 kg/L.
Drying time (25°C): Surface dry 1 h; hard dry 10 h.
Gloss: ≥70.
Application data (25°C)
Mixing: Single-component.
Induction time: None.
Pot life: Unlimited.
Application methods: Airless spray, brush, roller.
Thinner: Dedicated thinner; dilution 3–7%.
Recoat interval (25°C): Min 12 h; max unlimited.
Recommended coats / DFT: 1 coat 30–50 μm; brush/roller 1 coat 30–40 μm.
Surface preparation
Steel: blast/shot blast to Sa 2.5 or power-tool cleaning to St 3; surface profile 30–75 μm.
Concrete: must be dry (moisture content ≤6%), free of oil/contamination; apply after a sealing primer; for old coatings, consider roughening and remove chalked/loose areas.
System compatibility / packing / storage
Packing: 20 kg.
Storage: Shelf life 12 months; store dry/cool/ventilated, away from fire and direct sunlight; no outdoor stacking.
We would love to speak with you.
Feel free to reach out using the below details.
2K ethyl silicate inorganic zinc-rich primer with high zinc content for maximum cathodic protection on industrial steel. Engineered for bridges, transmission towers & oil pipelines. Weld and cut tolerant, Sa2.5 prep, 40–80µm DFT.
2K epoxy glass flake coating with exceptional chemical resistance and abrasion resistance for severe corrosive environments. Engineered for offshore structures, chemical plants & wastewater facilities. Achieves up to 300µm DFT in heavy-duty applications.
2K epoxy zinc phosphate primer with outstanding saltwater resistance and adhesion for heavy industrial applications. Engineered for port facilities, mining equipment & hydraulic steel in aggressive environments. Sa2.5 prep required, iron red or gray finish.
