ISO 9001:2015 Certified

PLX.52-1 High-chlorinated polyethylene enamel

Single-component high-chlorinated polyethylene enamel with outstanding UV resistance, color retention and chemical atmosphere resistance for steel and concrete. Suited for petrochemical, metallurgy and power industry structures. Fast-drying, 35µm DFT per coat.

Facebook
Twitter
LinkedIn

PLX.52-1 High-chlorinated polyethylene enamel Description

Overview
Single-pack high-chlorinated polyethylene enamel with weathering resistance and color retention.​
Full-bodied film with bright color; resistant to chemical-atmosphere corrosion; fast drying and low-temperature applicable.​

Composition
Formulated with high-chlorinated polyethylene resin, chlorinated olefin resin, weather-resistant pigments, plasticizer, solvents, and additives.​

Typical uses
For anti-corrosion finishing on steel structures and concrete surfaces in chemical, petroleum, metallurgy, and power industries.​

Technical data (typical)

  • Appearance: Various colors.​

  • Theoretical consumption: 0.16 kg/m² at 40 μm DFT (excluding loss).​

  • Density: 1.2 kg/L.​

  • Drying time (25°C): Surface dry 1 h; hard dry 24 h.​

Application data (25°C)

  • Mixing: Single-pack (silver white is split-pack; mixing ratio 6:1).​

  • Induction time: None.​

  • Pot life: Unlimited.​

  • Application methods: Airless spray, brush, roller.​

  • Thinner: X-16 high-chlorinated polyethylene thinner; dilution 3–7%.​

  • Recoat interval (25°C): Min 12 h; max unlimited.​

  • Recommended coats / DFT: 1 coat 40–60 μm; brush/roller 1 coat 30–45 μm.​

Surface preparation
Remove dust, oil, and debris from the previous coat; if beyond maximum recoat interval, consider roughening as needed.​
When used as the first coat: blast/shot blast to Sa 2.5 or power-tool cleaning to St 3; surface profile 30–75 μm.​

System compatibility / packing / storage

  • Compatibility: Previous coat—epoxy intermediate coating; high-chlorinated polyethylene anti-rust coating; high-chlorinated polyethylene intermediate coating.​

  • Packing: 22 kg.​

  • Storage: Shelf life 12 months; store dry/cool/ventilated, away from fire and direct sunlight; no outdoor stacking.

Contact Us

We would love to speak with you.
Feel free to reach out using the below details.

HUILI anti-corrosion coatings metal paint pail

PLH53-9 Epoxy Sealer Primer

2K epoxy sealer primer engineered for deep penetration and encapsulation of concrete and cement substrates. Seals and stabilizes surfaces to optimize adhesion for subsequent coating systems. Surface dry in 1 hour, full cure in 7 days.

HUILI anti-corrosion coatings metal paint pail

PLH53-6 Epoxy Zinc Phosphate Anti-Rust Primer

2K epoxy zinc phosphate primer with outstanding saltwater resistance and adhesion for heavy industrial applications. Engineered for port facilities, mining equipment & hydraulic steel in aggressive environments. Sa2.5 prep required, iron red or gray finish.

HUILI anti-corrosion coatings metal paint pail

PLH06-1 Epoxy Zinc-Rich Primer

2K epoxy zinc-rich primer engineered for cathodic protection on structural steel. Suited for shipbuilding, bridges & oil tanks in aggressive environments. Sa2.5 prep required, 35–40µm DFT.

INQUIRY NOW

Contact Information