- +86 150 5000 6973
- +1 225 255 1197 (US
- info@huilicoating.com
- Yongqiao District, Anhui, China
ISO 9001:2015 Certified
Single-component high-chlorinated polyethylene intermediate coat with high-solids formulation and outstanding barrier performance. Suited as midcoat or standalone primer for chemical and industrial steel structures. Fast-drying, 45µm DFT per coat.
Overview
Single-pack high-chlorinated polyethylene intermediate coating with strong film compatibility and good anti-rust performance.
High solids, thick film build, fast drying, suitable for low-temperature application.
Composition
Formulated with high-chlorinated polyethylene resin, stable resin, lamellar anti-rust pigments, plasticizer, solvents, and additives.
Typical uses
Used as an intermediate coating in systems to improve corrosion resistance and “three-proof” performance.
Can also be used as the first coat primer.
Technical data (typical)
Appearance: Brown; grey.
Theoretical consumption: 0.14 kg/m² at 40 μm DFT (excluding loss).
Density: 1.4 kg/L.
Drying time (25°C): Surface dry 1 h; hard dry 24 h.
Application data (25°C)
Mixing: Single-pack.
Induction time: None.
Pot life: Unlimited.
Application methods: Airless spray, brush, roller.
Thinner: X-16 high-chlorinated polyethylene thinner; dilution 3–7%.
Recoat interval (25°C): Min 12 h; max unlimited.
Recommended coats / DFT: 1 coat 40–60 μm; brush/roller 1 coat 30–45 μm.
Surface preparation
Remove dust, oil, and debris from the previous coat; if beyond maximum recoat interval, consider roughening as needed.
When used as the first coat: blast/shot blast to Sa 2.5 or power-tool cleaning to St 3; surface profile 30–75 μm.
System compatibility / packing / storage
Compatibility: Previous coat—epoxy anti-rust coating; epoxy MIO intermediate coating; high-chlorinated polyethylene primer.
Compatibility: Topcoats—high-chlorinated polyethylene topcoat; acrylic topcoat; chlorinated ether topcoat.
Packing: 25 kg.
Storage: Shelf life 12 months; store dry/cool/ventilated, away from fire and direct sunlight; no outdoor stacking.
We would love to speak with you.
Feel free to reach out using the below details.
2K high-build epoxy topcoat with high-solids formulation for heavy-duty corrosion protection on steel and concrete. Outstanding chemical, solvent and water resistance. 60µm DFT per coat, 2-coat system to 120µm.
Single-component water-based intumescent coating with 2-hour fire rating and outstanding weathering resistance for exterior steel structures. Resistant to UV, salt spray, freeze-thaw and acid-alkali exposure. Sa2.5 prep, 1.7–3.2mm application thickness.
2K epoxy MIO primer and intermediate coat with lamellar barrier structure for aggressive environments. Engineered for shipbuilding, bridges & port machinery. Single airless spray pass achieves 60–80µm DFT.
