Epoxy Glass Flake Topcoat (2K) – Epoxy glass flake topcoat for wet or chemical zones.
For underwater/humid areas and heavy chemical plants.
Mix ratio 20:2; pot life 4 h.
Salt water resistance: 1 year, no change.
PLH52-3 Epoxy Glass Flake Topcoat is a two-component epoxy glass flake topcoat with resistance to water and permeation of chemical media, used for long-term heavy-duty corrosion protection. This coating is intended for steel structures and concrete facilities in underwater or humid environments and heavy chemical areas, and it may also be used as an intermediate coat.
It is composed of epoxy resin, glass flakes, pigments, additives, and solvents, with a modified amine curing agent, and is supplied as Part A and Part B.
Resistant to water.
Resistant to permeation of chemical media.
Suitable for long-term heavy-duty corrosion protection.
Suitable for underwater or humid environments.
Suitable for heavy chemical areas.
Can be used as a topcoat or as an intermediate coat.
This coating is suitable for a wide range of steel and concrete protection projects in industrial and marine environments.
Steel structures in underwater environments.
Steel structures in humid environments.
Steel structures in heavy chemical areas.
Concrete facilities in underwater environments.
Concrete facilities in humid environments.
Concrete facilities in heavy chemical areas.
Over a two-component primer, the surface must be clean, dry, and free of contaminants; abrade if maximum recoat interval is exceeded. As first coat on steel, blast to Sa 2.5 or power-tool clean to St 3; surface profile 30–75 µm.
Storage
Store in a dry, cool, ventilated place away from ignition sources and direct sunlight; no outdoor storage.
Compatible undercoats include epoxy glass flake anti-rust coating and epoxy anti-rust coating. Other compatible undercoats may also be used where applicable.
This product is a two-component epoxy glass flake topcoat supplied as Part A and Part B.
This coating is designed for steel structures and concrete facilities.
Yes. This coating may also be used as an intermediate coat.
This coating can be applied by airless spray, brush, or roller.
The recommended dry film thickness is 60–80 µm per coat, or 30–50 µm per coat by brush/roller.
This coating is stated as suitable for underwater or humid environments and heavy chemical areas.
We would love to speak with you.
Feel free to reach out using the below details.
Epoxy High-Build Topcoat (2K) – High-solids epoxy topcoat for heavy-duty protection.
For steel structures and concrete surfaces.
Induction time 5 h; pot life 3 h.
Recoat 24 h–7 d; X-7 thinner 3–9%.
Outdoor Non-Intumescent Fireproof Coating for Steel Structure – Outdoor non-intumescent fireproof coating for steel structures.
3 h rating: ≥33 mm; 20–22 kg/m²; 5–6 coats.
Bond strength test result: 0.11 MPa.
Fire test: 33 mm thickness; 5400 mm span; 3.00 h.
Special Epoxy Primer (2K) – Two-component special epoxy primer for industrial corrosion protection.
For power, bridge, petrochemical, marine, and port facilities/equipment.
Pot life 2 h (25°C); mix ratio 25:2.5.
Compatible with epoxy MIO intermediate and epoxy/PU topcoat systems.
Epoxy MIO Intermediate Coating (2K) – Two-component epoxy micaceous iron oxide intermediate coating for barrier protection.
For ships, containers, bridges, steel gates, gas holders, port machinery, and steel structures; used over zinc-rich primer or sprayed zinc.
Mix ratio 27:3; pot life 4 h (25°C).
Recoat 12 h–7 d (25°C); overcoatable with epoxy and polyurethane systems.
Protect. Perform. Endure. – Advanced Coatings for Industrial Excellence.
© 2025 All Rights reserved Anhui HUILI Coating Technology Co., Ltd. | Privacy Policy
