- +86 150 5000 6973
- +1 225 255 1197 (US
- info@huilicoating.com
- Yongqiao District, Anhui, China
ISO 9001:2015 Certified
2K alkyl silicate inorganic zinc primer delivering cathodic protection with weld and cut tolerance on structural steel. Suited for low-temperature application with universal topcoat compatibility. Sa2.5 prep required, 30µm DFT.
PLE06-3 Inorganic Zinc Silicate Primer is a two-component inorganic zinc silicate primer based on ethyl silicate resin and zinc dust.
The product is formulated with ethyl silicate resin, zinc dust, toughening agent, anti-settling agent, and solvent, and is supplied as Part A and Part B. It is described as providing excellent corrosion resistance with cathodic protection, strong chemical resistance, weathering and abrasion resistance, heat resistance, and suitability for on-line welding/cutting.
Provides excellent corrosion resistance with cathodic protection
Described as having strong chemical resistance
Described as having weathering and abrasion resistance
Described as having heat resistance
Suitable for on-line welding/cutting
Typically used with epoxy coatings for corrosion protection
This primer is suitable for long-term steel protection projects in industrial and marine environments.
Typical application areas
Blast-cleaned steel
Steel requiring long-term anti-corrosion priming
Steel used with epoxy coating systems
Properly prepared steel requiring heat resistance up to 400°C
Abrasive blasting to Sa 3 (not lower than Sa 2.5), or power-tool cleaning to St 3; surface profile 30–75 µm.
Storage
Store in a dry, cool, ventilated warehouse away from fire sources and direct sunlight; outdoor storage is not permitted.
This primer is compatible with epoxy intermediate coating, epoxy topcoat, polyurethane intermediate coating, and polyurethane topcoat.
What is this primer used for?
This primer is used as a long-term anti-corrosion primer for blast-cleaned steel.
What is it based on?
The product is based on ethyl silicate resin and zinc dust.
What application methods are recommended?
The product can be applied by airless spray and brush.
What surface preparation is required before application?
Abrasive blasting to Sa 3 (not lower than Sa 2.5), or power-tool cleaning to St 3, with a surface profile of 30–75 µm.
What is the recommended recoat interval?
The minimum recoat interval is 24 h at 25°C and RH 70–85%, and it is longer at lower humidity; the maximum interval is not limited.
What coatings is it compatible with?
It is compatible with epoxy intermediate coating, epoxy topcoat, polyurethane intermediate coating, and polyurethane topcoat.
We would love to speak with you.
Feel free to reach out using the below details.
2K special epoxy primer with outstanding adhesion and impact resistance for demanding industrial applications. Engineered for power plants, bridges & petrochemical facilities. Compatible with all topcoat systems, 60µm DFT per coat.
2K epoxy anti-corrosive primer that chemically reacts with surface corrosion to form a stable protective complex. Applies directly to corroded steel up to 60µm, minimizing surface preparation. Minimum 40µm DFT, universal topcoat compatibility.
2K epoxy zinc-rich primer engineered for cathodic protection on structural steel. Suited for shipbuilding, bridges & oil tanks in aggressive environments. Sa2.5 prep required, 35–40µm DFT.
Industrial anti-corrosion and protective coating manufacturer. Direct supply from factory — no agents. ISO 9001 certified. Exporting to 30+ countries.
