- +86 150 5000 6973
- +1 225 255 1197 (US
- info@huilicoating.com
- Yongqiao District, Anhui, China
ISO 9001:2015 Certified
2K solvent-free epoxy coating with zero VOC achieving 400µm+ DFT in a single application. Suited for steel structures and storage tanks requiring heavy-duty corrosion protection. Full cure in 10 days.
PLH-50 Solvent-Free Epoxy Coating is a two-component solvent-free epoxy coating for high-build anti-corrosion protection. This coating is used for anti-corrosion protection on steel structures and storage tank surfaces with high requirements.
It is composed of epoxy resin, modified curing agent, special pigments and fillers, and additives, and is supplied as Part A and Part B.
Designed for high-build anti-corrosion protection.
Suitable for steel structures and storage tank surfaces.
Solvent-free formulation.
Volume solids: 100%.
Can be used at 70–150 µm per coat.
Can be applied up to 400 µm with special equipment.
This coating is suitable for a wide range of steel protection projects in industrial environments.
Steel structures
Storage tank surfaces
Anti-corrosion projects with high-build coating requirements
Blast to Sa 2.5 or power-tool clean to St 3; surface profile 30–75 µm.
Storage
dry, cool, ventilated; away from fire; avoid strong sunlight; no outdoor storage.
System compatibility: generally self-priming / self-finishing.
This product is a two-component solvent-free epoxy coating supplied as Part A and Part B.
This coating is used for steel structures and storage tank surfaces.
The volume solids content is 100%.
This coating can be applied by airless spray or brush.
X-7 epoxy thinner may be used; minimize thinning or do not thin.
The recommended dry film thickness per coat is 70–150 µm, and it can be applied up to 400 µm with special equipment.
We would love to speak with you.
Feel free to reach out using the below details.
Single-component water-based intumescent coating with 2-hour fire rating and outstanding weathering resistance for exterior steel structures. Resistant to UV, salt spray, freeze-thaw and acid-alkali exposure. Sa2.5 prep, 1.7–3.2mm application thickness.
Single-component water-based intumescent coating delivering a 2-hour fire rating for indoor steel structures and building frames. Non-toxic, low-VOC formulation with strong adhesion. Sa2.5 prep required, 1.7–3.3mm application thickness.
2K ethyl silicate inorganic zinc-rich primer with high zinc content for maximum cathodic protection on industrial steel. Engineered for bridges, transmission towers & oil pipelines. Weld and cut tolerant, Sa2.5 prep, 40–80µm DFT.
